What should be paid attention to in the design of high pressure braided hose?
Upload Time:
2022-06-15
The high-pressure braided hose must be noted that before installation, the hose must be carefully and carefully clamped. There may be cracks from time to time, and the hydraulic hose should be tapped with a wooden hammer to see if it has a mute sound.
The high-pressure braided hose must be noted that before installation, the hose must be carefully and carefully clamped. There may be cracks from time to time, and the hydraulic hose should be tapped with a wooden hammer to see if it has a mute sound. If you see cracks and muffled sounds, do not install the app. It should also be checked whether the speed ratio of the spindle of the lathe is consistent with the maximum safety application rate when the inner hole of the cloth hose is marked. When tightening the high-pressure braided hose, only a special manual nut wrench can be used, and it is forbidden to use a filling fixture or a special tool for knocking. In addition, when tightening, the high-pressure braided hose should pay attention to the tightness level of the nut or screw, and it is advisable to clamp it to a level that is enough to push the cloth-clamped hose without causing sliding driving force. Damaged hose.